How to remove fir tree gum?

How to remove fir tree gum?

You are walking through the forest and suddenly find yourself with fir tree gum all over you and your clothes. This is an unfortunate situation, but one that can still be resolved in a jiffy with the help of a few products and tips.

Want to effectively clean that sticky stain? 10 Tips presents below some good tips for removing fir gum and pine gum easily.

1. Remove fir gum with WD-40

Do you have WD-40 in your home workshop? WD-40 is an excellent lubricant and penetrating oil, but also an excellent cleaner against grease and a multitude of other stains.

Well if you have just stained a piece of clothing with fir gum or pine gum, this penetrating product can save your life.

Here’s how to use it to unfasten clothing:

  • Spray a thin layer of wd-40 on the fir gum stain (cover the entire stain well)
  • Leave for a few seconds and scrub the garment with a cloth or soft-bristled brush.
  • Rinse thoroughly and finish cleaning on the regular cycle in the washing machine.

WD-40 is also used against chewing gum as you can read in this other article: How to remove chewing gum?

2. Alcohol to 70° to remove a stain of fir resin

70° alcohol or rubbing alcohol is a good ally for this cleaning tip! Here’s how to unfasten a garment easily:

  • Soak a rag in rubbing alcohol and rub the fir or pine resin stain.
  • Rinse and wash the garment in hot water to remove the stain completely.

Rubbing alcohol can also be used to remove fir gum from hair.

Also effective for a grass stain!

Indeed, as you will discover in this other article, 70° alcohol is very useful against grass and plant stains: Removing a grass stain from clothing.

3. Butter to remove pine sap from the skin

Another thing you can do at home to remove a sap stain is to use butter or another fatty substance such as margarine for example.

This trick is effective for removing gum from fir, pine or other conifers on your skin.

So if your skin is glued with fir gum here is what you can do:

  • Rub sap-stained skin with butter or margarine.
  • Then rinse with soapy water to remove everything.

4. Scrape the sap and clean the sap with vinegar

If the resin stain is dry and in good quantity on the fabric, you must of course start by scraping off the excess resin.

Simple to do, here’s how to do it:

  • Use the back of a spoon to scrape off excess fir sap.
  • Soak the stain in white vinegar and leave to act for a few minutes.
  • Dampen a cloth with warm water and gently rub the sap stain.
  • Rinse and repeat if the stain still remains on the garment.

5. The iron to clean a resin stain

Resin, sap or tree gum stains, regardless of the source, the iron can be useful for cleaning this type of stubborn stain.

Here’s how to pull off this other cleaning trick:

  • Scrape off excess sap with the back of a spoon
  • Place a paper towel on the sap or resin stain and use an iron.

The heat will loosen the sap effectively and it will be absorbed by the paper towel.

This iron trick also works great for remove wax from clothing.

It is common to see a stain of resin or fir sap on the body of a car, especially if you live in the countryside.

But before using any product and tip it is important to read the following to avoid damaging your car’s paint and bodywork.

Rub the stain with butter or oil:

The best trick is to use butter or any oil. Indeed, a fatty substance will be effective in dislodging fir, pine or spruce gum and above all you will not risk damaging the body of the car.

Clean the resin stain with rubbing alcohol:

Soak a cloth in rubbing alcohol or rubbing alcohol and dab the stain to remove everything. Rinse with another damp cloth and dry the body well.

Laisser un commentaire